HP 234664-002 - ProLiant - ML330T02 설치 지침 매뉴얼 - 페이지 10

{카테고리_이름} HP 234664-002 - ProLiant - ML330T02에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP 234664-002 - ProLiant - ML330T02 15 페이지. Visualization and acceleration in hp proliant servers
HP 234664-002 - ProLiant - ML330T02에 대해서도 마찬가지입니다: 자주 묻는 질문 (4 페이지), 구현 매뉴얼 (35 페이지), 기술 백서 (12 페이지), 펌웨어 업데이트 (9 페이지), 개요 (20 페이지), 구현 매뉴얼 (26 페이지), 소개 매뉴얼 (22 페이지), 문제 해결 매뉴얼 (18 페이지), 구현 매뉴얼 (11 페이지), 설치 매뉴얼 (2 페이지), 구성 매뉴얼 (2 페이지), 소개 매뉴얼 (19 페이지), 업데이트 매뉴얼 (9 페이지), 업데이트 매뉴얼 (16 페이지), 소개 매뉴얼 (10 페이지), 기술 개요 (9 페이지)

페이지 인쇄
HP 234664-002 - ProLiant - ML330T02 설치 지침 매뉴얼

Task 3: Installing the Windows SBS 2003 R2 OS

After the system restarts, Windows SBS 2003 R2 installation automatically starts.
Verify the settings on the Regional Settings window, and click Next.
1.
In the Personalize Your Software window, type in the licensee name and organization and click
2.
Next.
NOTE:
At this point, you can change the default computer (server)
name and the default domain.
If desired, change the default computer (server) name and enter the administrator password.
3.
Click Next.
4.
Review the components pre-selected on the Windows Server 2003 Components window and click
5.
Next.
If your server contains a modem, enter your area code and telephone number, and click Next.
6.
NOTE:
If your server configuration does not include a modem or your
modem driver does not reside on the Windows SBS 2003 R2
CD, you will not receive a prompt for modem information. You
can install the modem after the installation of Windows SBS
2003 R2 by referring to Part 2: Task 1: "Installing and
configuring modem(s) and the appropriate driver(s)" section of
this integration note.
In the Date and Time Settings window, enter the Date, Time, and Time Zone, and then click Next.
7.
When prompted with the Networking Settings windows, select Typical Settings or Custom Settings
8.
and click Next. If you select Custom Settings, refer to the Windows SBS 2003 R2 documentation
to complete the Custom Settings interview options.
NOTE:
If you plan to add the NIC after Windows SBS 2003 R2
installation, refer to Task 2 of the "Installing and configuring
modem(s) and NIC(s)" section. The installation of Windows
SBS 2003 R2 continues until you are prompted with the
Completing the Windows SBS 2003 R2 Setup Wizard.
Remove the Windows SBS 2003 R2 CD-ROM #1, and click Finish to restart the server.
9.
Login to the OS and insert the Windows SBS 2003 R2 CD-ROM #1. The Microsoft Small Business
10.
Sever 2003 Setup Window prompt displays.
After developing a plan for the installation, highlight and click Set Up Small Business Server to
11.
begin the Post Operating System portion of the installation.
10