HP 234664-002 - ProLiant - ML330T02 Handleiding voor installatie-instructies - Pagina 10

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} HP 234664-002 - ProLiant - ML330T02. HP 234664-002 - ProLiant - ML330T02 15 pagina's. Visualization and acceleration in hp proliant servers
Ook voor HP 234664-002 - ProLiant - ML330T02: Veelgestelde vragen (4 pagina's), Implementatiehandleiding (35 pagina's), Technisch witboek (12 pagina's), Firmware bijwerken (9 pagina's), Overzicht (20 pagina's), Implementatiehandleiding (26 pagina's), Inleiding Handboek (22 pagina's), Handleiding voor probleemoplossing (18 pagina's), Implementatiehandleiding (11 pagina's), Installatiehandleiding (2 pagina's), Configuratiehandleiding (2 pagina's), Inleiding Handboek (19 pagina's), Handleiding bijwerken (9 pagina's), Handleiding bijwerken (16 pagina's), Inleiding Handboek (10 pagina's), Beknopte technologie (9 pagina's)

Task 3: Installing the Windows SBS 2003 R2 OS

After the system restarts, Windows SBS 2003 R2 installation automatically starts.

Verify the settings on the Regional Settings window, and click Next.

In the Personalize Your Software window, type in the licensee name and organization and click

Next.

NOTE:

At this point, you can change the default computer (server)

name and the default domain.

If desired, change the default computer (server) name and enter the administrator password.

Click Next.

Review the components pre-selected on the Windows Server 2003 Components window and click

Next.

If your server contains a modem, enter your area code and telephone number, and click Next.

NOTE:

If your server configuration does not include a modem or your

modem driver does not reside on the Windows SBS 2003 R2

CD, you will not receive a prompt for modem information. You

can install the modem after the installation of Windows SBS

2003 R2 by referring to Part 2: Task 1: "Installing and

configuring modem(s) and the appropriate driver(s)" section of

this integration note.

In the Date and Time Settings window, enter the Date, Time, and Time Zone, and then click Next.

When prompted with the Networking Settings windows, select Typical Settings or Custom Settings

and click Next. If you select Custom Settings, refer to the Windows SBS 2003 R2 documentation

to complete the Custom Settings interview options.

NOTE:

If you plan to add the NIC after Windows SBS 2003 R2

installation, refer to Task 2 of the "Installing and configuring

modem(s) and NIC(s)" section. The installation of Windows

SBS 2003 R2 continues until you are prompted with the

Completing the Windows SBS 2003 R2 Setup Wizard.

Remove the Windows SBS 2003 R2 CD-ROM #1, and click Finish to restart the server.

10.

Sever 2003 Setup Window prompt displays.

After developing a plan for the installation, highlight and click Set Up Small Business Server to

11.

begin the Post Operating System portion of the installation.