Miele K 12820 SD edt 작동 및 설치 지침 - 페이지 35

{카테고리_이름} Miele K 12820 SD edt에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele K 12820 SD edt 44 페이지. Refrigerator with dynamiccooling
Miele K 12820 SD edt에 대해서도 마찬가지입니다: 운영 및 설치 매뉴얼 (48 페이지), 운영 및 설치 매뉴얼 (40 페이지), 작동 및 설치 지침 (44 페이지), 작동 및 설치 지침 (48 페이지)

페이지 인쇄
Miele K 12820 SD edt 작동 및 설치 지침
^ Open the door.
^ Holding the door at the bottom and
on the handle side, carefully lift it
upwards and off.
The hinge pin e and washer o is
released from the hinge plate d. If it
does not release:
^ Press the hinge pin e with the
washer o out of the hinge plate from
below.
Changing the door hinging
^ Undo screws f and take hinge plate
d off.
^ Undo the screw of hinge part g on
hinge plate d slightly. Fit it into the
hole opposite in hinge plate d and
tighten up the screw.
^ Remove the plug h and place it in
the opposite retaining hole in the
hinge plate.
^ Remove cover i.
^ Unscrew and remove screw j and
refit it into the outer hole of the
opposite side.
^ Turn cover i through 180°, and fit it
into the holes on the other side.
^ Screw hinge plate d into position on
the opposite side using the two outer
long slots only. Do not use the middle
hole because you will not be able to
align the door later on.
35