Miele CS 1028 작동 및 설치 지침 - 페이지 12
{카테고리_이름} Miele CS 1028에 대한 작동 및 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Miele CS 1028 44 페이지. Combiset
Miele CS 1028에 대해서도 마찬가지입니다: 작동 및 설치 지침 (44 페이지), 작동 및 설치 지침 (44 페이지), 변환 지침 (40 페이지), 작동 및 설치 지침 (44 페이지)
페이지 인쇄
Operation
Turning on and off / Regulating
The control knob is used to turn on the
burner and to regulate the strength of
the flame.
ß The gas supply is turned off
* Ignition setting
& Highest flame
/ Lowest flame
The knob must only be turned left to
turn the appliance on and right to
turn it off.
If the knob is :
-
turned on without pressing it
down first,
-
turned clockwise to turn on, or
-
turned counterclockwise to turn
the combiset off,
parts of the combiset might get
damaged. The manufacturer cannot
be held responsible for these
damages.
12
Turning on
^ To turn on the burner, press the
control knob down and turn it
counterclockwise to the ignition
position a to turn on.
^ When the flame ignites, keep the
control pressed in for 8-10 seconds,
and then let go.
If the burner does not ignite or the
flame goes out, turn the control knob to
"ß". Try again after a few seconds.
If the burner still will not ignite after the
second attempt, turn the control knob
to "ß" and see "Frequently asked
questions".
^ Adjust the knob to the desired
setting.