Miele CS 1028 Bedienings- en installatie-instructies - Pagina 12

Blader online of download pdf Bedienings- en installatie-instructies voor {categorie_naam} Miele CS 1028. Miele CS 1028 44 pagina's. Combiset
Ook voor Miele CS 1028: Bedienings- en installatie-instructies (44 pagina's), Bedienings- en installatie-instructies (44 pagina's), Instructies omzetten (40 pagina's), Bedienings- en installatie-instructies (44 pagina's)

Operation

The control knob is used to turn on the

burner and to regulate the strength of

the flame.

ß The gas supply is turned off

* Ignition setting

& Highest flame

/ Lowest flame

The knob must only be turned left to

turn the appliance on and right to

turn it off.

If the knob is :

turned on without pressing it

down first,

turned clockwise to turn on, or

turned counterclockwise to turn

the combiset off,

parts of the combiset might get

damaged. The manufacturer cannot

be held responsible for these

damages.

Turning on

^ To turn on the burner, press the

control knob down and turn it

counterclockwise to the ignition

position a to turn on.

^ When the flame ignites, keep the

control pressed in for 8-10 seconds,

and then let go.

If the burner does not ignite or the

flame goes out, turn the control knob to

"ß". Try again after a few seconds.

If the burner still will not ignite after the

second attempt, turn the control knob

to "ß" and see "Frequently asked

questions".

^ Adjust the knob to the desired

setting.