Miele CS 1028 Çalıştırma ve Kurulum Talimatları - Sayfa 12

Setüstü Ocak Miele CS 1028 için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. Miele CS 1028 44 sayfaları. Combiset
Ayrıca Miele CS 1028 için: Çalıştırma ve Kurulum Talimatları (44 sayfalar), Çalıştırma ve Kurulum Talimatları (44 sayfalar), Dönüştürme Talimatları (40 sayfalar), Çalıştırma ve Kurulum Talimatları (44 sayfalar)

Miele CS 1028 Çalıştırma ve Kurulum Talimatları

Operation

Turning on and off / Regulating

The control knob is used to turn on the
burner and to regulate the strength of
the flame.
ß The gas supply is turned off
* Ignition setting
& Highest flame
/ Lowest flame
The knob must only be turned left to
turn the appliance on and right to
turn it off.
If the knob is :
-
turned on without pressing it
down first,
-
turned clockwise to turn on, or
-
turned counterclockwise to turn
the combiset off,
parts of the combiset might get
damaged. The manufacturer cannot
be held responsible for these
damages.
12
Turning on
^ To turn on the burner, press the
control knob down and turn it
counterclockwise to the ignition
position a to turn on.
^ When the flame ignites, keep the
control pressed in for 8-10 seconds,
and then let go.
If the burner does not ignite or the
flame goes out, turn the control knob to
"ß". Try again after a few seconds.
If the burner still will not ignite after the
second attempt, turn the control knob
to "ß" and see "Frequently asked
questions".
^ Adjust the knob to the desired
setting.