Allo RemoteControl SOMMER 4050 지침 - 페이지 2
{카테고리_이름} Allo RemoteControl SOMMER 4050에 대한 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Allo RemoteControl SOMMER 4050 2 페이지.
페이지 인쇄Receiver-based programming:
1. Disconnect your receiver. It is located next
to your motor.
2. Open the casing of your receiver
3. On the receiver circuit board (2), connect the
remote control as indicated in the diagram
above (1). The LED on the receiver lights up
(4).
4. Press the button you wish to program on
your new remote control (3). Keep it pressed
down. The LED light on the receiver turns
off. Release the button.
5. Wait 10 seconds
6. Your new remote control is programmed
Visit our Website: www.Alloremotecontrol.com
Visit our Website: www.Alloremotecontol.com
Visit our Website: www.Alloremotecontrol.com