Allo RemoteControl SOMMER 4050 Instructions - Page 2

Browse online or download pdf Instructions for Remote Control Allo RemoteControl SOMMER 4050. Allo RemoteControl SOMMER 4050 2 pages.

Print Page

Receiver-based programming:

1. Disconnect your receiver. It is located next

to your motor.

2. Open the casing of your receiver

3. On the receiver circuit board (2), connect the

remote control as indicated in the diagram

above (1). The LED on the receiver lights up

(4).

4. Press the button you wish to program on

your new remote control (3). Keep it pressed

down. The LED light on the receiver turns

off. Release the button.

5. Wait 10 seconds

6. Your new remote control is programmed

Visit our Website: www.Alloremotecontrol.com

Visit our Website: www.Alloremotecontol.com

Visit our Website: www.Alloremotecontrol.com