Miller MIGmatic M-25 소유자 매뉴얼 - 페이지 6

{카테고리_이름} Miller MIGmatic M-25에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Miller MIGmatic M-25 12 페이지. Air-cooled guns for gmaw and fcaw welding
Miller MIGmatic M-25에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지), 소유자 매뉴얼 (8 페이지)

페이지 인쇄
Miller MIGmatic M-25 소유자 매뉴얼
8.

Switch Replacement

See Parts List for correct replacement parts.
4
5
1
2
5/16 in
9.

Routine Maintenance

Replace
Cracked
Parts
OM-180 516 Page 6
6
3
Switch leads must
lay parallel.
Y Disconnect gun before maintaining.
Each Spool Of Wire
Blow Out
Gun
Casing
3 Months
Control
Cord
1
Switch Housing
2
Screw
Remove mounting screws from
switch housing.
3
Switch
4
Switch Leads
Carefully pull up on leads to remove
switch from housing.
5
Switch Lead Connectors
Remove switch lead connectors
from switch terminals and discard
old switch.
Push switch lead connectors onto
terminals of new switch.
6
Switch Plunger
Insert switch back into switch hous-
ing until it snaps into place.
Install switch housing back onto
handle.
Clean
Nozzle
And Check
Contact Tip
Gas
Hose
Gun Cable
ST-800 750