AquaScape Pro Air 20 지침 및 유지 관리 - 페이지 4

{카테고리_이름} AquaScape Pro Air 20에 대한 지침 및 유지 관리을 온라인으로 검색하거나 PDF를 다운로드하세요. AquaScape Pro Air 20 12 페이지. Aeration compressor
AquaScape Pro Air 20에 대해서도 마찬가지입니다: 설치 지침 및 유지 관리 (12 페이지)

페이지 인쇄

STEP 1

SET COMPRESSOR

• Set the compressor in the desired location. Select a

location near a ground fault circuit interrupter (GFCI) rated

receptacle.

Note: Do not submerge

the compressor in water.

We recommend placing

it in a location above the

pond's water level, whenever

possible, to prevent

water from entering the

compressor.

STEP 2

ATTACH TUBING

• Attach tubing with a check valve to the barbed

compressor outlet. It is recommended to use a hose

clamp to secure the tubing to the outlet.

Note: Installing a check valve will prevent water from

siphoning back through the tubing and entering the

compressor. Failure to properly install a check valve may

result in the compressor being permanently damaged,

voiding the warranty.

STEP 3

ATTACH TUBING TO DIFFUSER

• Attach the other end of the tubing to the diffuser. It is

recommended to use a hose clamp to secure the tubing to

the diffuser.

STEP 4

SET DIFFUSER IN POND

• Set the diffuser in the pond.

STEP 5

PLUG IN COMPRESSOR

• Plug the compressor into

a ground fault circuit

interrupter (GFCI) rated

receptacle and enjoy the

benefits!

☎

US (866) 877-6637 |

CAN (866) 766-3426 | aquascapeinc.com