AquaScape Pro Air 20 Talimatlar ve Bakım - Sayfa 4
Çim ve Bahçe Ekipmanları AquaScape Pro Air 20 için çevrimiçi göz atın veya pdf Talimatlar ve Bakım indirin. AquaScape Pro Air 20 12 sayfaları. Aeration compressor
Ayrıca AquaScape Pro Air 20 için: Kurulum Talimatları & Bakım (12 sayfalar)
Sayfayı Yazdır
STEP 1
SET COMPRESSOR
• Set the compressor in the desired location. Select a
location near a ground fault circuit interrupter (GFCI) rated
receptacle.
Note: Do not submerge
the compressor in water.
We recommend placing
it in a location above the
pond's water level, whenever
possible, to prevent
water from entering the
compressor.
STEP 2
ATTACH TUBING
• Attach tubing with a check valve to the barbed
compressor outlet. It is recommended to use a hose
clamp to secure the tubing to the outlet.
Note: Installing a check valve will prevent water from
siphoning back through the tubing and entering the
compressor. Failure to properly install a check valve may
result in the compressor being permanently damaged,
voiding the warranty.
STEP 3
ATTACH TUBING TO DIFFUSER
• Attach the other end of the tubing to the diffuser. It is
recommended to use a hose clamp to secure the tubing to
the diffuser.
4
STEP 4
SET DIFFUSER IN POND
• Set the diffuser in the pond.
STEP 5
PLUG IN COMPRESSOR
• Plug the compressor into
a ground fault circuit
interrupter (GFCI) rated
receptacle and enjoy the
benefits!
☎
☎
US (866) 877-6637 |
CAN (866) 766-3426 | aquascapeinc.com