Panasonic aw-he40 series 설치 및 설정 매뉴얼 - 페이지 6

{카테고리_이름} Panasonic aw-he40 series에 대한 설치 및 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Panasonic aw-he40 series 12 페이지. Adding another camera to existing system
Panasonic aw-he40 series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 매뉴얼 (4 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄

● This section provides noteworthy operating or setting procedures

selected from frequently asked questions to us.

My camera is installed on the ceiling. How can I turn the image upside down?

★ Turning upside down the output image from the camera assigned to [CAM1]

① Press the Button 1 at <CAMERA STATUS/SELECTION>. – (Fig. 5-A)

Hold down CAMERA OSD button – (Fig. 5-B) for 2 seconds. The button will light up. (To put it out,

hold it down again for 2 seconds.) And the on-screen menu (Fig. 6) will be opened on the SDI (or

HDMI) output image.

② Use F1 dial – (Fig. 5-C) to change the camera menu setting below.

Procedure: System ＞ Others ＞ Others 1/4 ＞ Install Position ⇒ Select [Hanging].

(Figure 5: AW-RP50 Control Panel)

（A）

Turn F1 → Select "System" →

Press F1

・

For details, please see the illustrated manual

(Figure 6: AW-HE40 On-Screen Menu)

Turn F1 → Select "Others" →

Press F1

"AW-HE40 – Turning Image Upside

（C）

（B）

・Press F1 → [Desktop] blinks.

・Turn F1 → Select [Hanging].

・Press F1 → Setting determined

Desktop ： Stand-alone Installation

Hanging ： Suspended Installation

Down".