HP StorageWorks 2/32 - SAN Switch 릴리스 노트 - 페이지 9
{카테고리_이름} HP StorageWorks 2/32 - SAN Switch에 대한 릴리스 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. HP StorageWorks 2/32 - SAN Switch 32 페이지. Fabric manager version 3.0.x release notes
HP StorageWorks 2/32 - SAN Switch에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (20 페이지), 사용자 설명서 (22 페이지), 펌웨어 릴리스 노트 (14 페이지), 릴리스 노트 (48 페이지), 설치 지침 매뉴얼 (6 페이지), 릴리스 노트 (14 페이지), 릴리스 노트 (4 페이지)
페이지 인쇄
•
The persistent log is implemented as a circular buffer. When more than maximum
entries are added to the persistent log, new entries overwrite old entries.
•
All error messages of levels Panic and Critical are automatically saved in the
persistent log as they are logged. This guarantees that critical or panic level
messages are not lost in the event of unexpected system reboot or fail-over.
•
A new command to control/filter error log messages. For example, the user may
specify that all log messages marked Warning remain in the persistent error log.
•
The commands errdump or errshow display a combination of the persistent
log messages saved during previous system run time cycles, and the error log
messages generated during the current run time cycle.
NOTE: Within Web Tools, the Fabric View Events ICON window does not separate persistent
from RAM error messages. Please use the Events ICON located on the SAN Switch 2/32 for
additional log details.
New Persistent Error Logging Commands
Three Fabric OS commands were modified and four new commands added for the
persistent error logging functionality. For more information, refer to the hp
StorageWorks Fabric OS Version 3.0.x/4.0.x Reference Guide.
The following commands were modified:
•
errdump
•
errshow
•
errclear
Also, the following commands allow you to manage the persistent error log:
•
errsavelvlset
•
errsavelvlshow
•
errnvlogsizeset
•
errnvlogsizeshow
SAN switch 2/32, version 4.0.2b release notes
SAN Switch 2/32 Firmware Version 4.0.2b Updates
9