HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 설치 지침 매뉴얼 - 페이지 16
{카테고리_이름} HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 20 페이지. 1u rackmount tape enclosure
HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM에 대해서도 마찬가지입니다: 설치 지침 (2 페이지), 설치 매뉴얼 (14 페이지), 릴리스 노트 (14 페이지), 설치 지침 (2 페이지), 참조 매뉴얼 (46 페이지)
페이지 인쇄
Note:
rails. Each switch requires a different number of these screws. For example,
shows the an inner rail being attached to the SAN Switch 2/16 with five screws.
Attaching both inner rails requires ten screws.
Figure 7: Assembling the inner rails
Note:
screw with thread lock and torque between 6 to 8 inch-pounds.
16
a. Assemble the two inner rails (one on each side) to the switch using the
appropriate number (from
screws as shown in
The rail kit provides fourteen #8-32 x 3/16-inch screws for assembling the inner
For factory integration only, tighten the #8-32 x 3/16-inch Phillips pan-head
step
5) of #8-32 x 3/16-inch Phillips pan-head
Figure
7.
SAN Switch Rack Mount Kit Installation Instructions
Figure 7