HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Руководство по установке - Страница 16

Просмотреть онлайн или скачать pdf Руководство по установке для Переключатель HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM. HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 20 страниц. 1u rackmount tape enclosure
Также для HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM: Инструкции по установке (2 страниц), Руководство по установке (14 страниц), Примечание к выпуску (14 страниц), Инструкции по установке (2 страниц), Справочное руководство (46 страниц)

Note:

rails. Each switch requires a different number of these screws. For example,

shows the an inner rail being attached to the SAN Switch 2/16 with five screws.

Attaching both inner rails requires ten screws.

Figure 7: Assembling the inner rails

Note:

screw with thread lock and torque between 6 to 8 inch-pounds.

a. Assemble the two inner rails (one on each side) to the switch using the

appropriate number (from

screws as shown in

The rail kit provides fourteen #8-32 x 3/16-inch screws for assembling the inner

For factory integration only, tighten the #8-32 x 3/16-inch Phillips pan-head

step

5) of #8-32 x 3/16-inch Phillips pan-head

Figure

SAN Switch Rack Mount Kit Installation Instructions

Figure 7