HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Руководство по установке - Страница 14

Просмотреть онлайн или скачать pdf Руководство по установке для Переключатель HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM. HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 20 страниц. 1u rackmount tape enclosure
Также для HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM: Инструкции по установке (2 страниц), Руководство по установке (14 страниц), Примечание к выпуску (14 страниц), Инструкции по установке (2 страниц), Справочное руководство (46 страниц)

Печатать страницу
HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Руководство по установке
Figure 6: Assembling the outer rails (HP System/e rack)
5. Determine the number of #8-32 x 3/16-inch Phillips pan-head screws with
Table 1: Number of screws required to assemble the inner rails
SAN Switch 2/32
SAN Switch 2/16
SAN Switch 2/8
14
— For an HP System/e rack, install two #10-32 x 1/2-inch Phillips pan-head
screws with captive star lock washers and two #10 alignment washers in
the upper and lower hole locations of the right rail. Then install two
#10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers
and two #10 alignment washers in the upper and lower hole locations of
the left rail. See
thread lock required to assemble the inner rails by referring to
Switch
Figure
6.
Number of #8-32 x 3/16-inch Screws
SAN Switch Rack Mount Kit Installation Instructions
12
10
14
Table
1.