HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Manual de instrucciones de instalación - Página 14

Navegue en línea o descargue pdf Manual de instrucciones de instalación para Interruptor HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM. HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 20 páginas. 1u rackmount tape enclosure
También para HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM: Instrucciones de instalación (2 páginas), Manual de instalación (14 páginas), Nota de publicación (14 páginas), Instrucciones de instalación (2 páginas), Manual de referencia (46 páginas)

Figure 6: Assembling the outer rails (HP System/e rack)

5. Determine the number of #8-32 x 3/16-inch Phillips pan-head screws with

Table 1: Number of screws required to assemble the inner rails

SAN Switch 2/32

SAN Switch 2/16

SAN Switch 2/8

— For an HP System/e rack, install two #10-32 x 1/2-inch Phillips pan-head

screws with captive star lock washers and two #10 alignment washers in

the upper and lower hole locations of the right rail. Then install two

#10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers

and two #10 alignment washers in the upper and lower hole locations of

the left rail. See

thread lock required to assemble the inner rails by referring to

Switch

Figure

Number of #8-32 x 3/16-inch Screws

SAN Switch Rack Mount Kit Installation Instructions

Table