HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Manuale di istruzioni per l'installazione - Pagina 14

Sfoglia online o scarica il pdf Manuale di istruzioni per l'installazione per Interruttore HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM. HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 20. 1u rackmount tape enclosure
Anche per HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM: Istruzioni per l'installazione (2 pagine), Manuale di installazione (14 pagine), Nota di rilascio (14 pagine), Istruzioni per l'installazione (2 pagine), Manuale di riferimento (46 pagine)

Figure 6: Assembling the outer rails (HP System/e rack)

5. Determine the number of #8-32 x 3/16-inch Phillips pan-head screws with

Table 1: Number of screws required to assemble the inner rails

SAN Switch 2/32

SAN Switch 2/16

SAN Switch 2/8

— For an HP System/e rack, install two #10-32 x 1/2-inch Phillips pan-head

screws with captive star lock washers and two #10 alignment washers in

the upper and lower hole locations of the right rail. Then install two

#10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers

and two #10 alignment washers in the upper and lower hole locations of

the left rail. See

thread lock required to assemble the inner rails by referring to

Switch

Figure

Number of #8-32 x 3/16-inch Screws

SAN Switch Rack Mount Kit Installation Instructions

Table