HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Manuel d'instructions d'installation - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM. HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 20 pages. 1u rackmount tape enclosure
Également pour HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM : Instructions d'installation (2 pages), Manuel d'installation (14 pages), Note de mise à jour (14 pages), Instructions d'installation (2 pages), Manuel de référence (46 pages)

Imprimer la page
HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Manuel d'instructions d'installation
Figure 6: Assembling the outer rails (HP System/e rack)
5. Determine the number of #8-32 x 3/16-inch Phillips pan-head screws with
Table 1: Number of screws required to assemble the inner rails
SAN Switch 2/32
SAN Switch 2/16
SAN Switch 2/8
14
— For an HP System/e rack, install two #10-32 x 1/2-inch Phillips pan-head
screws with captive star lock washers and two #10 alignment washers in
the upper and lower hole locations of the right rail. Then install two
#10-32 x 1/2-inch Phillips pan-head screws with captive star lock washers
and two #10 alignment washers in the upper and lower hole locations of
the left rail. See
thread lock required to assemble the inner rails by referring to
Switch
Figure
6.
Number of #8-32 x 3/16-inch Screws
SAN Switch Rack Mount Kit Installation Instructions
12
10
14
Table
1.