HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 설치 매뉴얼 - 페이지 8
{카테고리_이름} HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 14 페이지. 1u rackmount tape enclosure
HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM에 대해서도 마찬가지입니다: 설치 지침 (2 페이지), 설치 지침 매뉴얼 (20 페이지), 릴리스 노트 (14 페이지), 설치 지침 (2 페이지), 참조 매뉴얼 (46 페이지)
페이지 인쇄
Installing the Switch in a Rack Using the SAN Switch Universal Rack Mount Kit
Figure 5: Assembling the outer rails (HP 9000 Series or comparable EIA rack)
6
Addendum Pg
b. Depending on the rack you are using, complete one of the following tasks:
— For an HP 9000 Series or comparable EIA rack, install two #10-32 x
1/2-inch Phillips pan-head screws with captive star lock washers and two
#10 adapter washers in the upper and lower hole locations of the right rail.
Then install two #10-32 x 1/2-inch Phillips pan-head screws with captive
star lock washers and two #10 adapter washers in the upper and lower
hole locations of the left rail. See
Figure
5.
HP StorageWorks SAN Switch 2/8|16|32 Installation Guide