HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Installatiehandleiding - Pagina 8

Blader online of download pdf Installatiehandleiding voor {categorie_naam} HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM. HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 14 pagina's. 1u rackmount tape enclosure
Ook voor HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM: Installatie-instructies (2 pagina's), Handleiding voor installatie-instructies (20 pagina's), Release Release (14 pagina's), Installatie-instructies (2 pagina's), Referentiehandleiding (46 pagina's)

Installing the Switch in a Rack Using the SAN Switch Universal Rack Mount Kit

Figure 5: Assembling the outer rails (HP 9000 Series or comparable EIA rack)

Addendum Pg

b. Depending on the rack you are using, complete one of the following tasks:

— For an HP 9000 Series or comparable EIA rack, install two #10-32 x

1/2-inch Phillips pan-head screws with captive star lock washers and two

#10 adapter washers in the upper and lower hole locations of the right rail.

Then install two #10-32 x 1/2-inch Phillips pan-head screws with captive

star lock washers and two #10 adapter washers in the upper and lower

hole locations of the left rail. See

Figure

HP StorageWorks SAN Switch 2/8|16|32 Installation Guide