HP Xw460c - ProLiant - Blade Workstation 관리 매뉴얼 - 페이지 10

{카테고리_이름} HP Xw460c - ProLiant - Blade Workstation에 대한 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HP Xw460c - ProLiant - Blade Workstation 28 페이지. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
HP Xw460c - ProLiant - Blade Workstation에 대해서도 마찬가지입니다: 구현 매뉴얼 (35 페이지), 오류 방지 매뉴얼 (12 페이지), 기술 백서 (12 페이지), 펌웨어 업데이트 (9 페이지), 설치 매뉴얼 (2 페이지), 자주 묻는 질문 매뉴얼 (14 페이지), 설정 포스터 (9 페이지), 설치 매뉴얼 (33 페이지), 하드웨어 매뉴얼 (23 페이지), 개요 (35 페이지), 사용자 설명서 (33 페이지), 최적화 매뉴얼 (13 페이지), 제한 보증 (10 페이지), 설치 지침 매뉴얼 (10 페이지), 설치 지침 매뉴얼 (8 페이지), 설치 지침 (4 페이지), 설치 지침 (2 페이지)

On the Rack Overview page (Figure 9), the Onboard Administrator summarizes the power and

thermal information for all the c-Class enclosures linked in a rack. The information displayed includes

the present power for each enclosure, the ambient temperature of the enclosure, and a rack cooling

requirement in BTU/hr. This display dramatically reduces the complexity of monitoring the power and

cooling requirements for a rack full of server blades.

Figure 9. Rack Power and Thermal page via Onboard Administrator web GUI

Dynamic Power Savings mode is the default power supply setting. The Onboard Administrator

manages this mode based on the principle that power supplies operate less efficiently when lightly

loaded and more efficiently when heavily loaded. A typical power supply running at 20 percent load

could have efficiency as low as 60 percent; but running at 50 percent load, the power supply

efficiency could be 90 percent, thus providing significant savings in power consumption. Using real

time tracking of the total enclosure power consumption, the Onboard Administrator will shut down or

start up power supplies as required to maintain the power supplies and current load requirements

ratio in the maximum efficiency range. The number of power supplies active at any given time is

determined by calculating the number of power supplies necessary to maintain the power load

requirements and to keep the active power supplies in the high efficiency range. When Dynamic

Power Savings mode is enabled, some of the power supplies may be automatically placed on