DIBSIES MODERN EXPRESSIONS TOY BOX 조립 설명서 - 페이지 4
{카테고리_이름} DIBSIES MODERN EXPRESSIONS TOY BOX에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DIBSIES MODERN EXPRESSIONS TOY BOX 10 페이지.
페이지 인쇄
INSTRUCTIONS
Step 1 - Attaching the Part F Brackets
1.
Locate Part 1
Begin Step One by locating Part 1 and place
it flat on the ground with the holes facing
upward, as shown.
2.
Attach the Part F brackets to
Part 1
Next, locate two Part F brackets and four
Part E screws to the locations shown. A
total of one bracket and two screws will
be used for each side. Align the hardware
accordingly.
3.
Secure the Part F brackets
Secure both Part F brackets to Part 1 using
two Part E screws. Tighten the screws using
a Phillips screwdriver. Take care not to over
tighten the screws.
Step 2 - Attaching the Part A Stud
1.
Locate Part 5
Begin Step Two by locating Part 5 and
place it flat on the ground with the holes
facing upward, as shown.
2.
Align the Part A Stud to Part 5
Locate Part A and align it to the bottom
most center hole of Part 5, as shown.
3.
Secure the Part A Stud to Part 5
Next, secure the Part A stud to Part 5 using
a Phillips screwdriver. Take care not to over
tighten the stud.
DO NOT OVER TIGHTEN
4