DIBSIES MODERN EXPRESSIONS TOY BOX 조립 설명서 - 페이지 5
{카테고리_이름} DIBSIES MODERN EXPRESSIONS TOY BOX에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DIBSIES MODERN EXPRESSIONS TOY BOX 10 페이지.
페이지 인쇄
INSTRUCTIONS
Step 3 - Prepping the Part 7 Panel
5
1.
Locate Part 7
Begin Step Three by placing Part 7 flat on the floor with the
bottom holes facing upward.
2.
Locate Part 8 and align it in the bottom cen-
ter
Next, locate Part 8 and align it with bottom center holes of Part
7, and push into place.
3.
Secure Part 8 using two Part D screws
Secure Part 8 using two part D screws. Tighten the screws
using a Phillips screwdriver. Take care not to over tighten the
screws.
4.
Secure one Part A stud on the opposite end
Finally, locate the opposite edge of Part 7 and locate one Part
A stud in the center hole, as shown. Tighten the stud using a
Phillips screwdriver. Take care not to over tighten the stud.
DO NOT OVER TIGHTEN