DIBSIES MODERN EXPRESSIONS TOY BOX 조립 설명서 - 페이지 6
{카테고리_이름} DIBSIES MODERN EXPRESSIONS TOY BOX에 대한 조립 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DIBSIES MODERN EXPRESSIONS TOY BOX 10 페이지.
페이지 인쇄
INSTRUCTIONS
Step 4 - Attaching Part 9
USE FLATHEAD SCREWDRIVER
1.
Locate the Part 7 and Part 5 Panel assemblies
Begin Step Four by locating the previously assembled Part 7
and Part 5 assemblies from Steps Two and Three, and with the
assistance of another person, place them vertically parallel, as
shown.
2.
Locate Part 9 and align in the lower center
Next, locate Part 9 and align it to the lower center sections of
the Parts 7 and 9 assemblies, as shown.
3.
Locate two Part B nuts and push into the holes of Part
9
Locate two Part B nuts and place them into the edge holes
of Part 9, as shown. Once the Part B nuts are placed, locate
the Part A studs of Parts 7 and 5 assemblies and push them
towards the Part B nuts.
4.
Tighten the Part B nuts
Finally, tighten the Part B nuts by using a FLATHEAD
SCREWDRIVER. Take care not to over tighten the nuts.
Repeat tighten the opposite side as needed to fully secure the
assemblies.
6