Dickey-John GAC 2500 UGMA 매뉴얼 - 페이지 8
{카테고리_이름} Dickey-John GAC 2500 UGMA에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dickey-John GAC 2500 UGMA 12 페이지. Grain analysis computer
페이지 인쇄ADDENDUM (GAC® 2500 UGMA/INTL)
/
8
MAINTENANCE
TEMPERATURE SENSOR TYPE
The GAC 2500 is equipped with one of two different sensor types. The
cleaning method is similar for both types however the cotton swab for
cleaning varies based on the sensor type.
•
older instruments may include an embedded sensor on the circuit
board (recommended cotton swab McMaster-Carr p/n 71035T54)
•
newer instruments include a flush sensor on the circuit board and a
brush bracket (recommended cotton swab McMaster-Carr p/n
7074T12 )
TEMPERATURE SENSOR LOCATION
With the instrument placed upside down and looking inside the instrument,
the sensor probe is located in the middle of the instrument toward the top
and front attached to a circuit board.
Figure 17
Sensor Probe Location
Enlarged view of
flush sensor
Brush and
Bracket
Assembly
(flush sensor)
Enlarged view of
embedded sensor
OR
[
GAC® 2500 Models (UGMA & INTL)
11001-1646A-201409