Dickey-John GAC 2500 UGMA 매뉴얼 - 페이지 9

{카테고리_이름} Dickey-John GAC 2500 UGMA에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dickey-John GAC 2500 UGMA 12 페이지. Grain analysis computer

ADDENDUM (GAC® 2500 UGMA/INTL)

GAC® 2500 Models (UGMA & INTL)

11001-1646A-201409

To Clean the IR Temperature Sensor:

1. Gently place instrument upside down.

Figure 18

Place Instrument Upside Down

2. Visually inspect the IR temperature sensor to determine the type of

sensor installed.

3. For instruments with the flush sensor and brush bracket, the following

procedure can be utilized to remove particles from the brush. Carefully

place the head of the screw driver (10" length recommended) at the

bristles and use a sweeping side-to-side motion through the entire

length of the bristles no fewer than three times.

Figure 19

Cleaning the Brush Assembly

4. Select the appropriate cotton swab as described. Wet one end of the

cotton swab with 99% Isopropyl alcohol.

MAINTENANCE / 9