Olympus BX60 사용 설명서 - 페이지 28
{카테고리_이름} Olympus BX60에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus BX60 48 페이지. System microscope
Olympus BX60에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (4 페이지)
페이지 인쇄
BX60
Rotating the Stags
(Rg.43)
1. Slightly loosen the stage damping screw ©.
2. The stage can be rotated both to the left and to the right by turning
it with the stage clamping screw.
* A dick may be heard and fett during rotation. However, this is
duo to the construction of the stage bfsckot and does not indicate
a malfunction.
O The rotation angle changes depending on the position of the stage
knobs.
O The U-SIC stage cannot be rotated.
Stage Height Adjustment
(Rgs.44,46)
O By lowering the position of the substage. the microscope will
accommodate specimens with maximuin heights of 40 mm. This is
useful when observing metallurgical specimens end other thick objects.
1. Lower the stage to its tower Emit then remove the stage from the
microscope. (See page 3)
2. Using the Allan screwdriver, loosen the substage bracket clamping
screw © and remove the substage. (Fig. 44)
3. Turn the coarse adjustment knob and raise the focusing block (J) to
where the stopper screw (D in the ami becomes visible. (Fig. 4S1
4. Using the Allen screwdriver, loosen and remove the upper stopper
screw®.
5. Reattach substage bracket and stage.
O Store the removed stopper screw ® in a safe place so that it win not
be lost il needed again.
24