Olympus OEP-5 사용 설명서 - 페이지 14

{카테고리_이름} Olympus OEP-5에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus OEP-5 40 페이지. Color video printer

Chapter 3 Inspection Before Use

WARNING

Before each use, inspect this instrument as instructed

below. Inspect other equipment to be used with this

instrument as instructed in their respective instruction

manuals. Should the slightest irregularity be observed,

do not use this instrument and see "Chapter 7

Troubleshooting" in "INSTRUCTIONS

(ADVANCED)." If the irregularity is still observed,

contact Olympus.

Damage or irregularity may compromise the patient or

user safety, and may result in more severe equipment

damage.

Prepare this instrument and other equipment (shown in

"System Chart" on page 30 in the "Appendix") to be

used with this instrument for each particular case. Refer

to the respective instruction manuals for each piece of

ancillary equipment.

To disconnect the main power, unplug the AC IN

connector.

3.1 Inspection of the

Power Supply

Press the power switch to turn ON the color video

printer (OEP-5) (see Figure 3.1).

Confirm that the "PRINT" lamp and "ALARM"

lamp lights and then turns off (see Figure 3.1).

Press the power switch again.

Confirm that the LCD panel turns off.

PRINT lamp

ALARM lamp

LCD panel

Power switch

Figure 3.1

If the power fails to come on

If the power fails to come on, inspect according to

"Chapter 7 Troubleshooting" in "INSTRUCTIONS

(ADVANCED)."

If power still fails to turn ON, contact Olympus.