Olympus CKX41 사용 설명서 - 페이지 6

{카테고리_이름} Olympus CKX41에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Olympus CKX41 36 페이지. Reflected fluorescence system
Olympus CKX41에 대해서도 마찬가지입니다: 개요 (7 페이지), 브로셔 및 사양 (4 페이지), 수리 매뉴얼 (43 페이지)

페이지 인쇄

Maintenance and Storage

1. Be careful to avoid leaving dirt or fingerprints on the lenses, filters and high-pressure mercury burner,

for contamination of these parts may cast the shadow of a foreign object in the field of view or

compromises the burner performance.

If a glass component is contaminated, clean it by wiping gently with gauze. To remove fingerprints or oil

smudges, wipe with gauze slightly moistened with a mixture of ether (70%) and alcohol (30%).

Since solvents such as ether and alcohol are highly flammable, they must be handled carefully.

Be sure to keep these chemicals away from open flames or potential sources of electrical

sparks —— for example, electrical equipment that is being switched on or off. Also remember

to always use these chemicals only in a well-ventilated room.

2. The mercury burner has an average service life of 100 hours. When the hour counter on the power

supply unit indicates 100 hours, replace the burner with a new one (see page 26).

Using a burner after its service life expires could lead to the burner exploding, though this occurs very

rarely.

3. The surfaces of the dichroic mirror and excitation/barrier filters are very delicate. When it becomes

necessary to clean it, please contact Olympus.

4. Do not disassemble any part of the system as this could result in malfunction or reduced performance.

Caution

If the system is used in a manner not specified by this manual, the safety of the user may be imperiled.

In addition, the equipment may also be damaged. Always use the equipment as outlined in this instruc-

tion manual.

The following symbols are used to set off text in this instruction manual.

: Indicates that failure to follow the instructions in the warning could result in bodily

harm to the user and/or damage to equipment (including objects in the vicinity of the

equipment).

# : Indicates that failure to follow the instructions could result in damage to equipment.

} : Indicates commentary (for ease of operation and maintenance).