cinetics AXIS360 빠른 시작 매뉴얼 - 페이지 18

{카테고리_이름} cinetics AXIS360에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. cinetics AXIS360 19 페이지.

7 | Quickstart Controller Settings cont.

Main Page Settings

Press the Home/Play button. This is where you can customize your timelapse settings

Step 1: First set your End Point

Step 2: Do the above to set your Start Point

You can select Go to Start or Go to End by pressing the right arrow. This will show you the positions you

set for your start and end. If needed, you can make any adjustments; just make sure you select either

Set Start Point or Set End Point again by hitting the right arrow key to conﬁrm

Step 3: Scroll down to Record Time

Step 4: Set Playback Time

Step 5: Choose Exposure

Exposure should always be faster than the interval time so that camera has time to shoot before the

next movement

Step 6: Choose PlayB FPS (Playback Frames Per Second)

Step 7: Choose Move Type

Moving the right or left arrow will spin the motor right and left

Find the place you want your timelapse to end

To set End Point scroll down to Set End Point with the down arrow

then hit the right arrow button

There will now be a check mark next to Set End Point

Choose Record Time by pressing the right and left arrow keys to adjust the number

Press the right and left arrow keys to adjust the number

This will change the desired number of photos

Generally 24 FPS

S-M-S (shoot-move-shoot) stops to take a photo, moves, stops to take

a photo, moves and so on..

Continuous never stops moving while shooting the photos

17.