Creator CRT-531 Series 제품 사양 - 페이지 10
{카테고리_이름} Creator CRT-531 Series에 대한 제품 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Creator CRT-531 Series 13 페이지. Card dispenser
페이지 인쇄
SPECIFICATION
Procedure as follow:：
Main controller ：〈STX〉DC〈ETX〉〈BCC〉
Card dispenser ： Send ACK/NAK
Main controller ： ENQ
Main
controller
Send'RF'
until
card
completely
4.6.2 Card capture（the procedure is similar to card dispensing）
Main controller ：〈STX〉 CP 〈ETX〉〈BCC〉
Card dispensing ：Send ACK，responsible for card dispensing and modification of
Controller "CP"
Dispenser
ACK/NAK
4.6.3 Status require
Main controller ：〈STX〉 RF 〈ETX〉〈BCC〉
Card dispenser ：Send ACK, receive ENQ, then send〈STX〉 SF OOO〈ETX〉
Main controller "RF"
Card dispenser
5. ADJUST THE THICKNESS OF CARD DISPENSING
CRT-531 makes it more accurate and convenient to dispense cards in different thickness via
rotating the turn-knob to different gear position so as to adjust the gap between the upper and
lower transmiting wheels, which can eliminate the inconvenient and inaccurate gap adjustment
defects. With this feature, CRT-531 is quite suitable for the unattended vending devices to
dispense various cards of distinct thickness.
Card Dispenser
Card
：
dispensing and modification
constantly
of status register
dispensing
status of register
ENQ
ACK/NAK
Model No.
CRT-531
Date
2010-2-1
Ver.
Page
dispenser
Card
：
Enquiry constantly
Card
dispensing
modification of status register
ENQ
Card dispenser sends
code to host
3.0
10/13
and