Creator CRT-531 Series 제품 사양 - 페이지 11

{카테고리_이름} Creator CRT-531 Series에 대한 제품 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Creator CRT-531 Series 13 페이지. Card dispenser

SPECIFICATION

There are several steps to adjust the thickness of cards:

1. Confirm the thickness of cards ( Raised type character are not involved in)

2. Push the turn-knob and turn around to the graducation pointed by the red arrow.

Seeing pictures below.

3. Make sure the adjustment on the right position by insert cards from stacker. (Inserting

one card from stacker will be smooth and two cards simultaneously from behind can

be impossible)

6. MAINTENANCE AND CAUTIONS

After using for some time or dispensing amount of cards, the dispenser will be serious

wearing because of every part is running, so we need to do some maintenance to the

machine. The steps as follows:

1）Check the parts of the dispenser. If they become flexible or abnormal, reinforce them.

2）Check the straps of drive wheels. If they become flexible, regulate the position of the

elasticity wheel.

3 ） Use cleaning card or soft cloth with alcohol to clean the dispenser wheel in the

bottom of the hopper and the drive wheel.

Card Dispenser

Model No.

CRT-531

Date

2010-2-1

Ver.

Page

11/13

调节钮

Adjustment Button

标记

Mark

挡门

baffle

3.0