Axxess AX-ADFD01 설치 지침 매뉴얼
{카테고리_이름} Axxess AX-ADFD01에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Axxess AX-ADFD01 16 페이지. Data interface for ford
페이지 인쇄
INTERFACE FEATURES
• Provides accessory power (12-volt 10-amp)
• Maintains the retained accessory power (R.A.P.) feature
• Provides NAV outputs (parking brake, reverse, speed sense)
• Retains rear seat entertainment (R.S.E.)
• Retains satellite radio
• Retains SYNC
† Excluding Sony/THX
APPLICATIONS
See inside front cover
AxxessInterfaces.com
Ford Data Interface
2007-up*
*Visit AxxessInterfaces.com for up-to-date vehicle specific applications.
INTRODUCTION
The AX-ADFD01 harness is designed for, and must be used with, the
AX-ADBOX1 or AX-ADBOX2 interface (sold separately). Please refer to the
AX-ADBOX1 or AX-ADBOX2 for the 16-pin connector with stripped leads.
• Retains the factory AUX-IN jack
• Pre-wired ASWC-1 harness (ASWC-1 sold separately)
• Can be used in both non-amplified and amplified models
(including Sony/THX)
• Retains balance and fade†
• Micro "B" USB updatable
© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
AX-ADFD01
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
For models with a Sony/THX amplifier .........4-5
AX-ADBOX1 ...........................................................5
AX-ADBOX2 ..........................................................6
Adjusting the AX-ADFD01 ......................................7
Extra features .........................................................7
INTERFACE COMPONENTS
• AX-ADFD01 harness
TOOLS REQUIRED
• Crimping tool and connectors or solder gun,
solder, and heat shrink • Wire cutter • Zip ties
• Small flat-blade screwdriver • Tape
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
REV. 6/26/18 INSTAX-ADFD01