Creda FLORIDA PLUS 설치 및 사용자 설명서 - 페이지 5
{카테고리_이름} Creda FLORIDA PLUS에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Creda FLORIDA PLUS 12 페이지. Electric shower
페이지 인쇄
7. The shower is designed to have an open outlet and should only be used with "Creda"
recommended fittings.
Do not connect the handset until after the shower front cover and corner section are fitted.
WARNING: DO NOT FIT A TAP ON THE SHOWER OUTLET.
WARNING: TAKE CARE TO AVOID RESTRICTING THE OUTLET OF THE PRESSURE RELIEF
DEVICE.
c) ELECTRICAL
WARNING: THIS SHOWER MUST BE EARTHED.
The electrical installation must be in accordance with the current BS.7671 (IEE Wiring Regulations)
and "Part P" of the Building Regulations and/or local regulations
1. The shower unit is designed for a single phase AC electrical supply.
Please check the rating plate on the unit to see what details apply to your shower.
AS A GUIDE ONLY
Rating
8.5 / 7.8kW 240 / 230V
9.5 / 8.7kW 240 / 230V
10.5 / 9.6kW 240 / 230V
Remember to upgrade the cable if it runs in thermal insulation in a loft, or for a longer distance.
2. A means for disconnection in all poles must be incorporated in the fixed wiring in accordance
with the wiring rules.
We recommend a suitably rated ceiling switch mounted in a convenient position.
3. Cut back cable as in Diagram 3.
Connect cable to terminal block making sure that all the retaining screws are VERY TIGHT and
that no cable insulation is trapped under the screws.
WARNING: FAILURE TO COMPLY WITH THESE INSTRUCTIONS COULD RESULT IN
FAILURE OF THE TERMINAL BLOCK
(* Only applies if external earth impedance is less than 0.35 Ohms)
Cable Sizes
6.0mm²
10.0mm²
6.0mm²
10.0mm²
6.0mm²
10.0mm²
6.0mm²
10.0mm²
10.0mm²
Fuse / MCB
40A Type B MCB
45A BS.1361 fuse
40A Type B MCB
45A BS.1361 fuse
45A BS.1361 fuse
5
Cable Length
27m Max.
45m Max.
12m Max.*
21m Max.*
27m Max.
45m Max.
12m Max.*
21m Max.*
12m Max.*
Diagram 3
Cable Entry
Options