Aybey Elektronik ALYA Series 설치 매뉴얼 - 페이지 2

{카테고리_이름} Aybey Elektronik ALYA Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aybey Elektronik ALYA Series 5 페이지. Tft display serial communication lop

Aybey Elektronik ALYA Series 설치 매뉴얼
Figure 1
ALYA LOP Contents
ALYA Serial Communication LOP
Mounting Dowels and Screws
User Manual and Installation Manual
Terminating Resistor for systems without a shaft pit board with CAN interface.
SD Card

1- Mechanical Installation

1.1 Open the front cover by pressing the spring mechanism at the bottom center of
the ALYA LOP with a screwdriver.
1.2 Mark the holes of screws and cable by placing the rear plate onto wall you want
to install.
1.3 Drill the holes (shown on Figure 3 by X) for M6.5 dowels.
1.4 Open a hole in the wall through which the rectangular socket of the panel with
sizes 40x28mm can pass (shown as E in Figure 3)
1.5 Insert the four dowels into the drilled holes (X).
1.6 Attach the backplate on the wall by using 4 M4x30 screws to complete
mechanical installation.
Figure 2
1
Figure 3