Aybey Elektronik ALYA Series 설치 매뉴얼 - 페이지 4

{카테고리_이름} Aybey Elektronik ALYA Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aybey Elektronik ALYA Series 5 페이지. Tft display serial communication lop

3- Operation and Adjustment Operations

There are 3 programming buttons on the board: UP, DOWN and ENT. You can increase

the value of a parameter by pressing UP and decrease it by pressing DOWN button. After

setting it to the desired value, press ENT button shortly to confirm.

In order to enter adjustment menu press 3 seconds ENT button.

Floor Level Light: is used in systems with semi-

automatic doors. If this box is activated then AT FLOOR LEVEL indicator is lighted when

the car is at floor level.

Text Color: defines the color of the numbers and characters.

Arrow Color: defines the color of the direction arrow.

Back Color: defines the background color of the display. An image can be shown also in

background when IMAGE is selected in this box. The picture for the background should

be saved into the SD card with the name "tft .bmb" and it should be an image file in bmp

format.

Language: defines the screen language.

After editing all parameters

parameters press ENT button 3 for

seconds to save them and exit.

ID: is the floor number of the LOP.

Buzzer Level: defines volume level of

buzzer.

Simulation Floor: defines maximum

floor number shown in simulation

mode.

Simulation: If simulation is passive LOP

function normally and communicates

via CAN BUS. If simulation is active LOP

Works in simulation mode without

accepting calls and communicating

with the contoller.