Cres Cor CO151X185B 설치, 운영 및 유지보수 매뉴얼 - 페이지 3

{카테고리_이름} Cres Cor CO151X185B에 대한 설치, 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cres Cor CO151X185B 10 페이지. Convection and retherm ovens
Cres Cor CO151X185B에 대해서도 마찬가지입니다: 설치, 운영 및 유지보수 매뉴얼 (9 페이지), 설치, 운영 및 유지보수 매뉴얼 (12 페이지)

페이지 인쇄

5925 Heisley Road • Mentor, OH 44060-1833

877/CRES COR (273-7267) • 440/350-1100

Fax: 440/350-7267 • www.crescor.com

VENTING YOUR OVEN:

1. The purpose of ventilation hoods is to

direct and capture smoke, grease-laden

vapors, heat, odors, or fumes.

2. Low temperature equipment (maximum

temperature 250°F/121°C) does not

produce heat, odors, fumes, grease laden

vapors or smoke and is not required to

be vented.

ELECTRICAL SPECIFICATIONS:

Model Nos.

CO-151-XUA-5B-1201-Q1

CO-151-X-185B-1201-Q1

HOW TO INSTALL CABINETS:

1. Remove all packing material from inside

and outside of cabinet.

2. Position cabinet on level floor; install the

cabinet interior (pan slides) if not

already installed.

3. Plug power cord into proper wall

receptacle.

To install stacking units, refer to instruction sheet FL-2211, STACKING INSTALLATION.

INSTALLATION INSTRUCTIONS:

Volts

120

All models are designed for AC Service.

Model numbers may have the letters: L, M, T, or S.

Undercounter Ovens

3. Most jurisdictions consider our low-

temperature ovens (maximum

temperature is 350°F/177°C) as low-heat

appliances not requiring vent hoods.

4. Installation must conform to local codes.

The authority having jurisdiction of

enforcement of the codes will have the

responsibility for making interpretations

of the rules.

Watts

Amps

Hertz

2000

16.6

2000

16.6

NOTES: Cold food is NOT to be added when

unit is operating in HOLD mode.

For HOLD mode, preheat unit to 180°F/82°C

for 60 minutes.

FL-2292

3 of 10

Rev. 1 (9/04)

Page

NEMA

5-20P