Cisco 400 Series 구성 매뉴얼 - 페이지 17
{카테고리_이름} Cisco 400 Series에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 400 Series 40 페이지. Fasthub
10/100 series
Cisco 400 Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지)
페이지 인쇄
Section 1: SVP
10. Use the default
11. Set the
12. SpectraLink Wireless Telephones do not support dynamic power and
13. Click the
14. In the navigation pane under
15. Select
16.
17.
18. For
19. Click the
Setting up the SSID
PN: 1725-36192-001_H
Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs
For additional details on RF deployment please see the Deploying
Enterprise-Grade Wi-Fi Telephony white paper and the Best
Practices Guide for Deploying SpectraLink 8020/8030 Wireless
Telephones.
Fragmentation Threshold
Beacon Period
will not utilize the information element that is set when
is enabled. The handset power should be configured to match the
highest transmit power of the APs.
button to save the settings.
Apply
Any WLAN using the network must be disabled before changing
EDCA Parameters.
SpectraLink Voice Priority
Click the
Apply
button to save the settings.
In the navigation pane under
802.11a Network Status
Apply
button to save the settings.
Voice and data must be on separate SSIDs to prioritize voice traffic.
The voice SSID must be set to
data SSID must be set to
(2346 bytes).
to
.
100
802.11a/n,
select
from the drop-down list.
802.11a /n
, select
, click the
Enabled
for
Platinum
Quality of Service
for
Silver
Quality of Service
DTPC support
EDCA Parameters.
Network
.
check box.
and the
.
17