Cisco 9134 - MDS Multilayer Fabric Switch 구성 매뉴얼 - 페이지 13

{카테고리_이름} Cisco 9134 - MDS Multilayer Fabric Switch에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 9134 - MDS Multilayer Fabric Switch 49 페이지. Mds 9000 series
Cisco 9134 - MDS Multilayer Fabric Switch에 대해서도 마찬가지입니다: 사양 (3 페이지), 릴리스 노트 (48 페이지), 릴리스 노트 (44 페이지), 릴리스 노트 (22 페이지), 릴리스 노트 (3 페이지), 릴리스 노트 (40 페이지), 릴리스 정보 (10 페이지), 매뉴얼 (16 페이지), 하드웨어 설치 매뉴얼 (36 페이지)

페이지 인쇄
Cisco 9134 - MDS Multilayer Fabric Switch 구성 매뉴얼

Fibre Channel switches

The C-Series IP Storage Services Modules (IPS-4, IPS-8), and Multi–protocol Services Module (14/2)
are supported with the following HP C-Series Product Line switches:
•
MDS 9216, MDS 9216A, MDS 9216i Multilayer Fabric Switches
•
MDS 9506, MDS 9509, MDS 9513 Multilayer Director Switches
NOTE:
The MDS 9216i switch contains two embedded IP ports.

Operating system software and iSCSI Initiator support

Refer to the HP StorageWorks C-Series iSCSI support tables located at:
http://www.hp.com/support/manuals
In the Storage section, select the SAN Infrastructure link. Go to the C-Series section and select the link for
the Cisco MDS9216i Multilayer Fabric Switch.

C-Series management software

The following management software is supported:
•
Cisco Fabric Manager
•
Cisco Device Manager
•
CLI

HP network teaming

HP NIC teaming is supported with the Windows operating system only.

Network interface controllers (NIC)

All NICs supported by HP are supported for this product. For optimal performance, HP recommends
that Gigabit Ethernet NICs be used.

Multi-pathing

Multi-pathing is supported on EVA4000/6000/8000 only in a Windows environment using the Microsoft
Multipath I/O driver (MPIO), supported with iSCSI. Without multi-path capabilities, the iSCSI initiator can
only access one path of the storage controllers, which disables controller failover protection.
C-Series iSCSI
13