Cisco 9134 - MDS Multilayer Fabric Switch Yapılandırma Kılavuzu - Sayfa 13

Anahtar Cisco 9134 - MDS Multilayer Fabric Switch için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu indirin. Cisco 9134 - MDS Multilayer Fabric Switch 49 sayfaları. Mds 9000 series
Ayrıca Cisco 9134 - MDS Multilayer Fabric Switch için: Teknik Özellikler (3 sayfalar), Yayın Notu (48 sayfalar), Yayın Notu (44 sayfalar), Yayın Notu (22 sayfalar), Yayın Notu (3 sayfalar), Yayın Notu (40 sayfalar), Sürüm Notları (10 sayfalar), Manuel (16 sayfalar), Donanım Kurulum Kılavuzu (36 sayfalar)

Cisco 9134 - MDS Multilayer Fabric Switch Yapılandırma Kılavuzu

Fibre Channel switches

The C-Series IP Storage Services Modules (IPS-4, IPS-8), and Multi–protocol Services Module (14/2)
are supported with the following HP C-Series Product Line switches:
MDS 9216, MDS 9216A, MDS 9216i Multilayer Fabric Switches
MDS 9506, MDS 9509, MDS 9513 Multilayer Director Switches
NOTE:
The MDS 9216i switch contains two embedded IP ports.

Operating system software and iSCSI Initiator support

Refer to the HP StorageWorks C-Series iSCSI support tables located at:
http://www.hp.com/support/manuals
In the Storage section, select the SAN Infrastructure link. Go to the C-Series section and select the link for
the Cisco MDS9216i Multilayer Fabric Switch.

C-Series management software

The following management software is supported:
Cisco Fabric Manager
Cisco Device Manager
CLI

HP network teaming

HP NIC teaming is supported with the Windows operating system only.

Network interface controllers (NIC)

All NICs supported by HP are supported for this product. For optimal performance, HP recommends
that Gigabit Ethernet NICs be used.

Multi-pathing

Multi-pathing is supported on EVA4000/6000/8000 only in a Windows environment using the Microsoft
Multipath I/O driver (MPIO), supported with iSCSI. Without multi-path capabilities, the iSCSI initiator can
only access one path of the storage controllers, which disables controller failover protection.
C-Series iSCSI
13