Cisco 9134 - MDS Multilayer Fabric Switch Podręcznik konfiguracji - Strona 13

Przeglądaj online lub pobierz pdf Podręcznik konfiguracji dla Przełącznik Cisco 9134 - MDS Multilayer Fabric Switch. Cisco 9134 - MDS Multilayer Fabric Switch 49 stron. Mds 9000 series
Również dla Cisco 9134 - MDS Multilayer Fabric Switch: Specyfikacje (3 strony), Uwaga dotycząca wydania (48 strony), Uwaga dotycząca wydania (44 strony), Uwaga dotycząca wydania (22 strony), Uwaga dotycząca wydania (3 strony), Uwaga dotycząca wydania (40 strony), Informacje o wersji (10 strony), Podręcznik (16 strony), Instrukcja instalacji sprzętu (36 strony)

Fibre Channel switches

The C-Series IP Storage Services Modules (IPS-4, IPS-8), and Multi–protocol Services Module (14/2)

are supported with the following HP C-Series Product Line switches:

•

MDS 9216, MDS 9216A, MDS 9216i Multilayer Fabric Switches

•

MDS 9506, MDS 9509, MDS 9513 Multilayer Director Switches

NOTE:

The MDS 9216i switch contains two embedded IP ports.

Refer to the HP StorageWorks C-Series iSCSI support tables located at:

http://www.hp.com/support/manuals

In the Storage section, select the SAN Infrastructure link. Go to the C-Series section and select the link for

the Cisco MDS9216i Multilayer Fabric Switch.

The following management software is supported:

•

Cisco Fabric Manager

•

Cisco Device Manager

•

CLI

HP NIC teaming is supported with the Windows operating system only.

All NICs supported by HP are supported for this product. For optimal performance, HP recommends

that Gigabit Ethernet NICs be used.

Multi-pathing is supported on EVA4000/6000/8000 only in a Windows environment using the Microsoft

Multipath I/O driver (MPIO), supported with iSCSI. Without multi-path capabilities, the iSCSI initiator can

only access one path of the storage controllers, which disables controller failover protection.

C-Series iSCSI