Cisco Catalyst 2960-S Series 시작 설명서 - 페이지 19

{카테고리_이름} Cisco Catalyst 2960-S Series에 대한 시작 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Catalyst 2960-S Series 31 페이지. Switch getting
Cisco Catalyst 2960-S Series에 대해서도 마찬가지입니다: 데이터시트 (28 페이지), 설치 매뉴얼 (27 페이지)

페이지 인쇄

Catalyst 2960-S Switch Getting Started Guide

Installation Warning Statements

Warning

OL-19793-02

For 10/100 or 10/100/1000 fixed ports, cable lengths from the switch to

•

connected devices can be up to 328 feet (100 meters).

For cable lengths for small form-factor pluggable (SFP)-module connections,

•

see the hardware installation guide on Cisco.com and the documentation that

shipped with the module.

This section includes the basic installation warning statements. Translations of

these warning statements appear in the Regulatory Compliance and Safety

Information for the Catalyst 2960 and 2960-S Switches document on Cisco.com.

To prevent bodily injury when mounting or servicing this unit in a rack, you must

take special precautions to ensure that the system remains stable. The

following guidelines are provided to ensure your safety:

This unit should be mounted at the bottom of the rack if it is the only unit in the

rack.

When mounting this unit in a partially filled rack, load the rack from the bottom

to the top with the heaviest component at the bottom of the rack.

If the rack is provided with stabilizing devices, install the stabilizers before

mounting or servicing the unit in the rack. Statement 1006

Class 1 laser product. Statement 1008

This equipment must be grounded. Never defeat the ground conductor or

operate the equipment in the absence of a suitably installed ground conductor.

Contact the appropriate electrical inspection authority or an electrician if you

are uncertain that suitable grounding is available. Statement 1024

Catalyst 2960-S Switch Getting Started Guide