Sharp AR-M208 서비스 매뉴얼 - 페이지 19
{카테고리_이름} Sharp AR-M208에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-M208 32 페이지. Digital laser copier/ printer
Sharp AR-M208에 대해서도 마찬가지입니다: 주요 운영자 매뉴얼 (24 페이지)
페이지 인쇄22
22-3
Purpose
Adjustment/setting/operation data output/check
(display/print)
Function
Used to check the misfeed positions and the number of
(Purpose)
misfeed at each position. (When the number of
misfeed is considerably great, it can be judged as
necessary for repair.)
Item
Trouble
Operation/procedure
The misfeed history is displayed in the sequence of recentness by the
name of sensors and detectors. Max. 40 items of information can be
stored in memory. (The old ones are deleted sequentially.) The trouble
section may be determined by the data.
Sim22-3 JAM HIS.1/5
XXXXXXX
XXXXXXX
XXXXXXX
XXXXXXX
XXXXXXX
XXXXXXX
XXXXXXX
XXXXXXX
Error code
Name
1st cassette
1ST_PICK
pickup mistake
2nd cassette
2ND_PICK
pickup mistake
3rd cassette
3RD_PICK
pickup mistake
4th cassette
4TH_PICK
pickup mistake
Multi manual
HND_PICK
feed pickup
mistake
P-IN sensor
PIN_TOP
lead edge jam
P-IN sensor
PIN_END
rear edge jam
P-IN sensor
PIN_DUP
reversion jam
Duplex sensor
DPX_TOP
lead edge jam
Duplex sensor
DPX_END
rear edge jam
Mis-feed
Paper
Reached/Not
Sensor name
reached to
Sensor
1st cassette P-IN
Not reached *1
sensor
2nd cassette
Not reached *1
paper pass
sensor
3rd cassette
Not reached *1
paper pass
sensor
4th cassette
Not reached *1
paper pass
sensor
Manual feed P-IN
Not reached
sensor
2nd cassette
Reached (from
paper pass
2nd cassette
sensor
only)
P-IN sensor or
Not reached
manual feed P-IN
sensor
P-IN sensor
Reached (1st
cassette)
Manual feed P-IN
Reached (2, 3,
sensor
4, DUP, manual
feed)
Manual feed P-IN
Not reached
sensor
(DUP)
P-IN sensor or
Reached
manual feed P-IN
sensor
DUP sensor
Not reached
(Paper exit
sensor)
P-OUT sensor
Reached
(1st paper exit
sensor)
DUP sensor
Either of
(Paper exit
Reached/Not
sensor)
reached
AR-M208 SIMULATION 8 - 5
Error code
Name
2nd paper exit
UPO_TOP
lead edge jam
2nd paper exit
UPO_END
rear edge jam
1st paper exit
LPO_TOP
lead edge jam
1st paper exit
LPO_END
rear edge jam
Abnormality
PS
between PS
paper
2nd paper pass
2ND_TOP
lead edge jam
*2
3rd paper pass
3RD_TOP
lead edge jam
*3
4th_TOP, END 4th paper pass
jam
Duplex short
DPX_SHORT
size error
Duplex long
DPX_LONG
size error
Finisher paper
FIN_PIN
in jam
Escape (upper
FIN_ESCP
stage) tray jam
Offset (lower
FIN_OFST
stage) tray jam
Staple tray jam
FIN_STPL
*1. Not reached, double fed and the next paper reached the paper-in
sensor.
*2. Detects that paper from 3rd (4th) stage enters 2nd stage.
*3. Detects that paper from 4th stage enters 3rd stage.
*4. The passing time over P-IN sensor (manual feed P-IN sensor) of
the front surface differs greatly from that of the back surface.
*5. Occurs when not reached either of FIN_ESC sensor and
FIN_P_OFSET sensor.
22-5
Purpose
Adjustment/Setting/Check
Function
Used to check the ROM version of each unit (section).
(Purpose)
Item
Software
Operation/procedure
ROM and CPU data of each section are displayed.
Sim22-5 ROM VER.1/2
S/N
:0000000000
MCU
:00.00
IMC
:00.00
OPE
:00.00 XXX
*1
[Display example]
ROM version 1.250
[1.25] (upto 2 decimal places)
Paper
Reached/Not
Sensor name
reached to
Sensor
DUP sensor
Reached
(Paper exit
sensor)
P-OUT sensor
Not reached
(2nd paper exit
sensor)
P-OUT sensor
Reached
(2nd paper exit
jam)
FIN_P_IN sensor Not reached
DUP sensor
Reached
P-OUT sensor
Not reached
(1st paper exit
sensor)
P-OUT sensor
Reached
(1st paper exit
sensor)
3rd (4th) cassette
Reached (from
paper pass
3rd, 4th
sensor
cassette only)
4th cassette
Reached (from
paper pass
4th cassette
sensor
only)
Does not occur.
*4
*4
FIN_P_IN sensor Reached
FIN_ESC sensor
Reached *5
FIN_P_OFSET
Reached
sensor
FIN_STPL sensor Reached