Sharp AR-M208 서비스 매뉴얼 - 페이지 17

{카테고리_이름} Sharp AR-M208에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-M208 32 페이지. Digital laser copier/ printer
Sharp AR-M208에 대해서도 마찬가지입니다: 주요 운영자 매뉴얼 (24 페이지)

페이지 인쇄

The input value is in the increment of –25V.

(Initial screen)

(Input/Selection screen) (Executing screen)

Sim8-3 MHV(L) COPY

1:AE

5:SUPER PHOTO

2:TEXT

3:TEXT/PHOTO

1/2

EXEC [ 1- 8]

Display items

Content

AE ( )

1:AE

Character

2:TEXT

Character/Photo

3:TEXT/PHOTO

Photo

4:PHOTO

Super photo

5:SUPER PHOTO *

Toner save

6:TONER SAVE

( ) Linked with the destinations of SIM 26-6.

Linked with the auto exposure mode of SIM 46-19-1.

* SUPER PHOTO (5:) cannot be executed.

When [OK] or [START] key is pressed, a caution buzzer sounds.

(Only the adjustment value can be entered.)

NO.

Set value

Grid High

480

–480V

505

–505V

530

–530V

555

–555V

580

–580V

605

–605V

630

–630V

655

–655V

*1. The negative value of the set value corresponds to the grid high

output voltage.

*2. The set values can be selected from the above 8 patterns only.

*3. The selected pattern determines the grid high voltage and the grid

low voltage.

If, for example, the grid high voltage is set to –480V (pattern 1), the

grid low voltage is –350V.

8-10

Purpose

Adjustment/Operation test/check

Function

Used to check and adjust the operation of the

(Purpose)

developing bias voltage in each printer mode and the

control circuit.

Section

Image process (Photoconductor/Developing/Transfer/

Cleaning)

Developer/Toner hopper

Operation/procedure

After selecting the mode, enter the adjustment value and press the

[OK] key, and output will be made for 30sec.

(Initial screen)

(Input/Selection screen) (Executing screen)

Sim8-10 DV BIAS PRT

1:DENS1(600)

400

5:DENS5(600)

2:DENS2(600)

450

3:DENS3(600)

450

1/4

EXEC [200-550]

Sim8-3 MHV(L) COPY

5:SUPER PHOTO

EXEC

[ 1- 8]

Setting

Default

range

1-8

3 (–400V)

5 (–450V)

Disabled

2 (–375V)

Grid Low

–350V

–375V

–400V

–425V

–450V

–475V

–500V

–525V

Sim8-10 DV BIAS PRT

500

5:DENS5(600)

500

EXEC

[200-550]

500

AR-M208 SIMULATION 8 - 3

Display items

1:DENS1(600)

2:DENS2(600)

3:DENS3(600)

4:DENS4(600)

5:DENS5(600)

6:TS(600)

7:DENS1(1200)

8:DENS2(1200)

9:DENS3(1200)

10:DENS4(1200) Density 4 (1200dpi)

11:DENS5(1200) Density 5 (1200dpi)

The minimum increment is 2V.

The result of (Set value – 199) / 2 is stored in the EEPROM.

When reading a value from the EEPROM, the value of (EEP value *2)

+ 200 is used as the set value.

Therefore, the set value entered must be an even number. If an odd

number is entered the entered odd number + 1 is displayed after

pressing [OK] key.

8-11

Purpose

Adjustment/Operation test/check

Function

Used to check and adjust the operation of the main

(Purpose)

charger grid voltage (high mode) in each printer mode

and the control circuit.

Section

Image process (Photoconductor/Developing/Transfer/

Cleaning)

Photo conductor

Operation/procedure

After selecting the mode, enter the adjustment value and press the

[OK] key, and output will be made for 30sec.

The input value is in the increment of –25V.

(Initial screen)

Sim8-11 MHV(H) PRT

1:DENS1(600)

2:DENS2(600)

3:DENS3(600)

1/4

Display items

1:DENS1(600)

2:DENS2(600)

3:DENS3(600)

4:DENS4(600)

5:DENS5(600)

6:TS(600)

7:DENS1(1200)

8:DENS2(1200)

9:DENS3(1200)

10:DENS4(1200)

11:DENS5(1200)

Installation

Content

range

Density 1 (600dpi)

200-550

Density 2 (600dpi)

Density 3 (600dpi)

Density 4 (600dpi)

Density 5 (600dpi)

Toner save (600dpi)

Density 1 (1200dpi)

Density 2 (1200dpi)

Density 3 (1200dpi)

(Input/Selection screen) (Executing screen)

Sim8-11 MHV(H) PRT

5:DENS5(600)

EXEC [ 1- 8]

EXEC

Installation

Content

range

Density 1 (600dpi)

1-8

Density 2 (600dpi)

Density 3 (600dpi)

Density 4 (600dpi)

Density 5 (600dpi)

Toner save (600dpi)

Density 1 (1200dpi)

Density 2 (1200dpi)

Density 3 (1200dpi)

Density 4 (1200dpi)

Density 5 (1200dpi)

Default

400 (–400V)

450 (–450V)

500 (–500V)

350 (–350V)

Disabled

[ 1- 8]

Default

5 (–580V)

7 (–630V)

3 (–530V)

Disabled