Sharp AR-M208 Servicehandleiding - Pagina 17

Blader online of download pdf Servicehandleiding voor {categorie_naam} Sharp AR-M208. Sharp AR-M208 32 pagina's. Digital laser copier/ printer
Ook voor Sharp AR-M208: Gebruikershandleiding (24 pagina's)

Pagina afdrukken
The input value is in the increment of –25V.
(Initial screen)
(Input/Selection screen) (Executing screen)
Sim8-3 MHV(L) COPY
Sim8-3 MHV(L) COPY
1:AE
3
5:SUPER PHOTO
2:TEXT
5
3:TEXT/PHOTO
5
1/2
EXEC [ 1- 8]
Display items
Content
AE ( )
1:AE
Character
2:TEXT
Character/Photo
3:TEXT/PHOTO
Photo
4:PHOTO
Super photo
5:SUPER PHOTO *
Toner save
6:TONER SAVE
( ) Linked with the destinations of SIM 26-6.
Linked with the auto exposure mode of SIM 46-19-1.
* SUPER PHOTO (5:) cannot be executed.
When [OK] or [START] key is pressed, a caution buzzer sounds.
(Only the adjustment value can be entered.)
NO.
Set value
Grid High
1
480
–480V
2
505
–505V
3
530
–530V
4
555
–555V
5
580
–580V
6
605
–605V
7
630
–630V
8
655
–655V
*1. The negative value of the set value corresponds to the grid high
output voltage.
*2. The set values can be selected from the above 8 patterns only.
*3. The selected pattern determines the grid high voltage and the grid
low voltage.
If, for example, the grid high voltage is set to –480V (pattern 1), the
grid low voltage is –350V.
8-10
Purpose
Adjustment/Operation test/check
Function
Used to check and adjust the operation of the
(Purpose)
developing bias voltage in each printer mode and the
control circuit.
Section
Image process (Photoconductor/Developing/Transfer/
Cleaning)
Developer/Toner hopper
Operation/procedure
After selecting the mode, enter the adjustment value and press the
[OK] key, and output will be made for 30sec.
(Initial screen)
(Input/Selection screen) (Executing screen)
Sim8-10 DV BIAS PRT
Sim8-10 DV BIAS PRT
1:DENS1(600)
400
5:DENS5(600)
2:DENS2(600)
450
3:DENS3(600)
450
1/4
EXEC [200-550]
Sim8-3 MHV(L) COPY
3
5:SUPER PHOTO
3
EXEC
[ 1- 8]
Setting
Default
range
1-8
3 (–400V)
5 (–450V)
5 (–450V)
5 (–450V)
Disabled
2 (–375V)
Grid Low
–350V
–375V
–400V
–425V
–450V
–475V
–500V
–525V
Sim8-10 DV BIAS PRT
500
5:DENS5(600)
500
500
EXEC
[200-550]
500
AR-M208 SIMULATION 8 - 3
Display items
1:DENS1(600)
3
2:DENS2(600)
3:DENS3(600)
4:DENS4(600)
3
5:DENS5(600)
6:TS(600)
7:DENS1(1200)
8:DENS2(1200)
9:DENS3(1200)
10:DENS4(1200) Density 4 (1200dpi)
11:DENS5(1200) Density 5 (1200dpi)
The minimum increment is 2V.
The result of (Set value – 199) / 2 is stored in the EEPROM.
When reading a value from the EEPROM, the value of (EEP value *2)
+ 200 is used as the set value.
Therefore, the set value entered must be an even number. If an odd
number is entered the entered odd number + 1 is displayed after
pressing [OK] key.
8-11
Purpose
Adjustment/Operation test/check
Function
Used to check and adjust the operation of the main
(Purpose)
charger grid voltage (high mode) in each printer mode
and the control circuit.
Section
Image process (Photoconductor/Developing/Transfer/
Cleaning)
Photo conductor
Operation/procedure
After selecting the mode, enter the adjustment value and press the
[OK] key, and output will be made for 30sec.
The input value is in the increment of –25V.
(Initial screen)
Sim8-11 MHV(H) PRT
1:DENS1(600)
3
2:DENS2(600)
5
3:DENS3(600)
5
1/4
Display items
1:DENS1(600)
2:DENS2(600)
3:DENS3(600)
4:DENS4(600)
5:DENS5(600)
6:TS(600)
7:DENS1(1200)
8:DENS2(1200)
9:DENS3(1200)
10:DENS4(1200)
11:DENS5(1200)
Installation
Content
range
Density 1 (600dpi)
200-550
Density 2 (600dpi)
Density 3 (600dpi)
Density 4 (600dpi)
Density 5 (600dpi)
Toner save (600dpi)
Density 1 (1200dpi)
Density 2 (1200dpi)
Density 3 (1200dpi)
(Input/Selection screen) (Executing screen)
Sim8-11 MHV(H) PRT
Sim8-11 MHV(H) PRT
5:DENS5(600)
7
5:DENS5(600)
EXEC [ 1- 8]
7
EXEC
Installation
Content
range
Density 1 (600dpi)
1-8
Density 2 (600dpi)
Density 3 (600dpi)
Density 4 (600dpi)
Density 5 (600dpi)
Toner save (600dpi)
Density 1 (1200dpi)
Density 2 (1200dpi)
Density 3 (1200dpi)
Density 4 (1200dpi)
Density 5 (1200dpi)
Default
400 (–400V)
450 (–450V)
450 (–450V)
450 (–450V)
500 (–500V)
350 (–350V)
Disabled
Disabled
Disabled
Disabled
Disabled
7
[ 1- 8]
7
Default
5 (–580V)
5 (–580V)
5 (–580V)
5 (–580V)
7 (–630V)
3 (–530V)
Disabled
Disabled
Disabled
Disabled
Disabled