Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector 운영 매뉴얼 - 페이지 9
{카테고리_이름} Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector 47 페이지. Colour inkjet printer
Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector에 대해서도 마찬가지입니다: 운영 매뉴얼 (49 페이지), 운영 매뉴얼 (49 페이지), 기본 정보 및 준비 사항 (10 페이지)
![Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector 운영 매뉴얼](/uploads/products/server2/5056418/5056418.png)
Rear Side
USB interface connector (B type)
Use a USB cable to connect the
printer to your computer. It is possible
to insert the cable after the printer has
been switched on.
Parallel interface
connector (36pin)
Use a parallel interface cable
(IEEE1284) to connect the
printer to your computer.
* When the power cord is connected to the outlet, power for the printer is turned on automatically.
HOW TO SHUT OFF POWER
Turn off the power by pressing the power button and ensure
1
that the power lamp is extinguished.
Unplug the power cord from the outlet.
2
Be sure that the plug in the outlet is readily accessible to all persons. Power is
present in the product even if the power button is off in order to maintain good
print quality.
To completely shut off the power, first turn off the power using the power button.
Then unplug the power cord, after first ensuring that the carriage has returned to
its home position on the right side of the printer and the green power lamp has
been extinguished.
PART NAMES AND FUNCTIONS
Bypass tray
Use this tray to print on a single page.
When printing large banners, make sure to
use this tray. Insert paper into the tray print
side up. When printing onto thick paper,
open the tray until it reaches position 2.
(The tray has two stop positions.)
Power socket
Plug the power cord *
into the socket.
Jam cover
Open this cover to remove
jammed paper.
7