Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector Руководство по эксплуатации - Страница 9
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Проектор Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector. Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector 47 страниц. Colour inkjet printer
Также для Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector: Руководство по эксплуатации (49 страниц), Руководство по эксплуатации (49 страниц), Основная информация и препараты (10 страниц)
Rear Side
USB interface connector (B type)
Use a USB cable to connect the
printer to your computer. It is possible
to insert the cable after the printer has
been switched on.
Parallel interface
connector (36pin)
Use a parallel interface cable
(IEEE1284) to connect the
printer to your computer.
* When the power cord is connected to the outlet, power for the printer is turned on automatically.
HOW TO SHUT OFF POWER
Turn off the power by pressing the power button and ensure
1
that the power lamp is extinguished.
Unplug the power cord from the outlet.
2
Be sure that the plug in the outlet is readily accessible to all persons. Power is
present in the product even if the power button is off in order to maintain good
print quality.
To completely shut off the power, first turn off the power using the power button.
Then unplug the power cord, after first ensuring that the carriage has returned to
its home position on the right side of the printer and the green power lamp has
been extinguished.
PART NAMES AND FUNCTIONS
Bypass tray
Use this tray to print on a single page.
When printing large banners, make sure to
use this tray. Insert paper into the tray print
side up. When printing onto thick paper,
open the tray until it reaches position 2.
(The tray has two stop positions.)
Power socket
Plug the power cord *
into the socket.
Jam cover
Open this cover to remove
jammed paper.
7