Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector Посібник з експлуатації - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Проектор Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector. Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector 47 сторінок. Colour inkjet printer
Також для Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector: Посібник з експлуатації (49 сторінок), Посібник з експлуатації (49 сторінок), Основна інформація та підготовка (10 сторінок)

Rear Side

USB interface connector (B type)

Use a USB cable to connect the

printer to your computer. It is possible

to insert the cable after the printer has

been switched on.

Parallel interface

connector (36pin)

Use a parallel interface cable

(IEEE1284) to connect the

printer to your computer.

* When the power cord is connected to the outlet, power for the printer is turned on automatically.

HOW TO SHUT OFF POWER

Turn off the power by pressing the power button and ensure

that the power lamp is extinguished.

Unplug the power cord from the outlet.

Be sure that the plug in the outlet is readily accessible to all persons. Power is

present in the product even if the power button is off in order to maintain good

print quality.

To completely shut off the power, first turn off the power using the power button.

Then unplug the power cord, after first ensuring that the carriage has returned to

its home position on the right side of the printer and the green power lamp has

been extinguished.

PART NAMES AND FUNCTIONS

Bypass tray

Use this tray to print on a single page.

When printing large banners, make sure to

use this tray. Insert paper into the tray print

side up. When printing onto thick paper,

open the tray until it reaches position 2.

(The tray has two stop positions.)

Power socket

Plug the power cord *

into the socket.

Jam cover

Open this cover to remove

jammed paper.