Digital Alert Systems MultiPlayer DASMP 빠른 시작 매뉴얼 - 페이지 5
{카테고리_이름} Digital Alert Systems MultiPlayer DASMP에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digital Alert Systems MultiPlayer DASMP 13 페이지.
페이지 인쇄Digital Alert Systems
MultiPlayer Quick Start Guide
The next screenshot is the Audio Port Configuration page of the MultiPlayer. In this configuration, all of the channels are AES
digital channels. Port 1 is channel 1, port 2 is channel 2, port 3 is channel 3, and port 4 is channel 4. Each port is individual and
is not bonded to another port. In the DASDEC MultiStation interface, channel 1 would be seen as station 1, channel 2 would be
seen as station 2, channel 3 would be seen as station 3 and channel 4 would be seen as station 4. Therefore, 4 stations can be
configured in the MultiStation interface of the DASDEC.
The screenshot to the right shows the different channel
types that can be selected for port 1 using the dropdown
menu under each port name. While Port 1 was already
configured to be AES from earlier it can easily be changed
to Analog, or Originator.
With AES3 selected for the Port configuration, an input
source is required on the desired Port.
To use AES audio without an input source, "ORIG" must
be selected from the drop down menu, shown on the right.
Revision 4.0
Page 5 of 13